Brownells - Products by Brand

1377 Total Results

Brownells Taren Tactical Innovations M&P Firepower Base Pad Kit +5/+6

Patented proven push pin design Super easy to attach and detach from the magazine No specialty tools or devices required to disassemble One piece design, no extra parts to possibly lose during disassembly Designed specifically for the M&P CNC machined from billet aluminum Hard Anodized Made in the USA Mfg: Brownells

$44.99
 
$39.99 (11% OFF)

* Pricing & Availability are subject to change at any time.

Brownells Mossberg 500/590/835/930/935 Safety Kit

Includes the Brownells Enhanced Safety Button and the other parts in the safety system that get worn, dinged up, or lost. Replace everything at the same time to ensure smooth, positive, reliable operation of this critical component. Safety button screw also sold separately, so you don't have to buy a whole new kit if the screw gets damaged during installation. Mfg: Brownells SPECS: Kit includes enhanced safety button, button screw, detent plate, detent ball, detent spring, and installation instructions. Fits Mossberg 500/590/835/930/935 shotguns.

$35.99

* Pricing & Availability are subject to change at any time.

Brownells Ar-15/M16 20 & 30 Round Magazine Combo Pack

Load a smooth-feeding Brownells 30-round AR-15/M16 magazine to maximum capacity and fire all the rounds--no jams, no misfeeds, no hangups. All components are manufactured under strict ISO quality control standards from top-quality mil-spec materials. The heat-treated, welded aluminum body is hard-anodized for superior corrosion resistance, then given a tough, dry-lube coating to eliminate the need for additional lubricants that attract dust, sand, or dirt. The latest military-type glass-fiber reinforced composite follower further guarantees flawless feeding in the harshest operating conditions. The high-lubricity, dry-lube coated chrome silicon spring is corrosion-resistance certified to 500 Mfg: Brownells

$124.99

* Pricing & Availability are subject to change at any time.

Brownells 1911 Plunger Detent Assembly

Each and every part is U.S.-made, high-quality and guaranteed to fit and function just like the factory part. Mfg: Brownells SPECS: Fits 1911 Auto. Carbon steel, blued (B) or stainless steel (S) , natural finish. Plunger Detent Assemblies A include Slide Stop Plunger, Safety Lock Plunger and Plunger Spring.

$3.99

* Pricing & Availability are subject to change at any time.

Brownells 1911 Slide Stop Plunger

Each and every part is U.S.-made, high-quality and guaranteed to fit and function just like the factory part. Mfg: Brownells SPECS: Fits 1911 Auto. All parts carbon steel. (B) indicates blued finish, (S) indicates stainless steel.

$2.09

* Pricing & Availability are subject to change at any time.

Brownells 1911 Auto Mainspring Housing Rebuild Kit

Handy kit contains all the parts you need to mount a new mainspring housing on your 1911, or reburish the internal components to factory-new condition. Includes standard, factory weight (23 lb.) hammer spring to help ensure positive ignition and restore your pistol's reliability by replacing an old, weak spring. Also includes mainspring cap, cap pin, and retaining pin, so you don't ruin a good-looking new housing's appearance with old, dinged hardware. Kit available with blued or stainless external components to match your pistol's finish. Installation instructions included. Mfg: Brownells SPECS: Kit contains factory weight hammer spring, mainspring cap, cap pin, mainspring housing retainer pin, and instructions. Fits full-size 1911 Government Model, Commander, and clones.

$8.99

* Pricing & Availability are subject to change at any time.

Brownells Ar-15 Short Muzzle Brake 22 Caliber

The Brownells Short Muzzle Brakes offer an effective braking solution, with minimal added length Features: Designed to provide maximum braking ability in the smallest size possible One inch overall length Two rows of 0.125"" ports evenly distribute exiting gasses and pressure Wrench flats on each side for simple installation Available in tool steel with a black oxide finish or stainless steel Available with a 0.75"" OD for perfect fitting to AR-15 or precision rifle barrels 0.75"" OD models feature 1/2-28 threads Mfg: Brownells Construction, tool steel with a black oxide finish or stainless steel. Length 1"". Diameter 0.75"". Threads 1/2-28. Do not use bullets larger in diameter than .223/5.56 in SMB 5.56

$59.99

* Pricing & Availability are subject to change at any time.

Brownells Rifle Ready Bag And Shoulder Strap

For those situations where you like to keep a rifle and accessories close at hand, the Brownells Rifle Ready Bag gives you high quality and discretion in an American made bag. Bag features a padded main compartment with full length divider, allowing storage of accessories or gear in front of a fully protected rifle, or allows you to transport both upper and lower of a disassembled AR-type firearm without them banging together or allowing finish damage. Fastex retention strap keeps your rifle from shifting inside the bag. Reinforced front pouch is large enough to accommodate most chest rigs, bandolier pouches, and fighting bags to be instantly ready to deploy, or ample space for handgun case Mfg: Brownells

$209.99
 
$179.99 (14% OFF)

* Pricing & Availability are subject to change at any time.

Brownells Shotgun Case

Protect your shotgun in style with a padded nylon case from Brownells. Soft interior prevents scratches in the finish and tough Nylon exterior resists wear and abrasion. Detachable adjustable sling changes to fit any size shooter, and allows for different carry methods. Pair of built-in briefcase-style handles gives another carry option. Deep exterior pocket easily holds extra choke tubes, tools or even a few spare shells. Available in Black, Tan or Mossy Oak camo. 52""x6""x2.5"" exterior dimensions. Mfg: Brownells

$34.99
 
$24.99 (29% OFF)

* Pricing & Availability are subject to change at any time.

Brownells 3 Gun Case

54""x12""x5"" Made of Cordura material YKK Zippers Interior divider Padded interior Internal security straps for your guns Two large external pouches Mfg: Brownells

$99.99

* Pricing & Availability are subject to change at any time.

Brownells 3 Gun Case W/ 3-Pk 30-Rd Pmags

The Brownells Exclusive 3 Gun Case! Available in Black or Tan. Features a rugged cordura material and padded interior. It also has internal security straps for your guns. The outside has two large external pouches for extra materials you may want to bring along. YKK zippers. 54"" x 12"" x 5"". Paired with a 3-pack of Magpul 30-rd PMAGs. Exceptionally rugged, combat- and competition-ready magazine functions flawlessly, even when left fully loaded for extended periods. Corrosion-proof, self-lubricating one-piece body of fiber-reinforced, molded polymer has no spot welds or joints to impair the follower, and the constant internal curve ensures smooth, unobstructed movement o Mfg: Brownells

$109.99

* Pricing & Availability are subject to change at any time.

Brownells Ar-15 80% Lower Receiver W/ Jig & Lower Parts Kit

Brownells has paired together the Polymer 80 Polymer 80% Lower Receiver and the Full Metal Tactical Lower Parts Kit to help the DIY'er along the way! Polymer 80% Lower Receiver and Complete Jig, everything you need to get your own build started. Unique reinforced polymer design allows for a great project build. Solid core design and beefed up buffer tube area ensure this lower will last. Improved Jig system provides insert for trigger hole drilling, and also includes necessary end mill bits. Kit Includes: AR-15 80% Lower, Set Screw Bolt Catch Pin, Dowel Pin for Bolt Catch, Pistol Grip Nut, Pistol Grip Screw, Allen Wrench, AR-15 Jig, End Mill for fire control pocket, Dr Mfg: Brownells

$114.99
 
$104.99 (9% OFF)

* Pricing & Availability are subject to change at any time.

Brownells Ar-15 Assembled Upper Receiver Keymod 300 Blackout

This Brownells' exclusive AR-15 Upper Receiver is Made in the USA. Chambered in 300 Blackout and featuring a 16"" barrel with a 1:8 twist. The standard A3 13-slot aluminum flat top receiver comes with a 10"" handguard utilizing the KeyMod rail system. A low profile gas block, forward assist, ejection port cover and phosphate finish help to complete this package. Left out of this upper are the bolt carrier group as well as the charging handle so you can customize the upper any way you want! The A3 upper receiver will attach to almost any standard AR-15 lower receiver. Mfg: Brownells

$284.99
 
$239.99 (16% OFF)

* Pricing & Availability are subject to change at any time.

Brownells Remington 1100/11-87 Interceptor Latch Retainer

Thicker-than-factory replacement decreases the amount of play in the latch body to improve feeding and ensure positive operation. Available in three different thicknesses. Mfg: Brownells SPECS: Steel, black oxide, matte finish. .025"" (.64mm) , .030"" (.76mm) , or .035"" (.89mm) thick.

$1.99

* Pricing & Availability are subject to change at any time.

Brownells Shotgun Wad Solvent

Specially formulated to loosen plastic wad fouling, carbon and powder buildup, Brownells Shotgun Wad Solvent helps reduce scrubbing for easier cleaning of smoothbore and rifled shotgun barrels. Starts breaking down the residue to help get heavily fouled shotgun bores shiny clean in less time. A real time saver for loosening that burned-in wad residue in ported barrels or choke tubes. Regular use helps prevent wad layering and carbon accumulation. Slow-evaporating for longer working time. Liquid is for those who prefer traditional liquid bore cleaners. The gel consistency of our Gelled solvent provides superior adhesion to the patch and bore for maximum dissolving power and eliminates the Mfg: Brownells SPECS: Liquid 4 fl. oz. (118ml) or 16 fl.oz. (473ml) . Gel 16 fl oz.

$12.99
 
$6.99 (46% OFF)

* Pricing & Availability are subject to change at any time.

Brownells Pro-Springs? For Action Tuning For The Colt Mustang .380

Specially selected replacement springs to greatly improve functioning AND reduce trigger pull form the basis of a top-quality 1911 tuning job. 5 Wolff coil springs. Includes: Variable Power Recoil Spring which functions with a wider range of ammo than single power springs; Hammer Spring which lightens trigger pull; Extra Power Firing Pin Spring; New Magazine Catch; Series 80 Firing Pin Safety Block Spring; Plunger Tube Springs, plus the Sear Spring. Three kits - each with a different strength recoil spring. M-456 for the Colt Mustang .380 - Includes a 12 lb., extra A power recoil spring with an extra power firing pin spring to A improve functioning plus a reduced power, 20 lb. main sp Mfg: Brownells

TAGS Mustang .380
Read more
$16.45

* Pricing & Availability are subject to change at any time.

Brownells Ss-311 Pro-Spring Kit For Savage/Stevens 311 Shotgun

Kit SS-311 provides the highest quality action-tuning springs by Wolff to help the model 311 shotgun ""hang"" open for reloading, gives less cocking effort. Contains (2) factory standard hammer springs, (1) 15% RP sear spring, (2) 30% RP hammer springs, and (1) 15% RP top lever spring. Mfg: Brownells SPECS: RP = Reduced Power.

$30.24

* Pricing & Availability are subject to change at any time.

Brownells ""fits-All"" Shotgun Magazine Plug

Ever spent the better part of an afternoon ""manufacturing"" a new magazine plug for a customer? It's a trial-and-error process that keeps the customer happy but makes you poor. With our new universal Fits-All Plug, all that's required is a simple snap at the correct notch to fit all popular shotguns. For those oddball guns with non-standard length magazines, simply notch the Fits-All with a shop knife at the length required and snap! It's that easy! Complete instructions and convenient Snap-To-Fit Chart included. Made of unbelievably tough polypropylene with an oversize head to position it correctly in all magazines - Won't slide or rattle. Bright, safety-orange color is e Mfg: Brownells SPECS: 10-9/16"" (26.8cm) long. 9/16"" (14.3mm) diameter head. 3/8"" (9.5mm) ribbed body.

Read more
$6.99

* Pricing & Availability are subject to change at any time.

Brownells Complete .38-.45 Chamfering Kit

To cover the ""whole nine yards"" there's the COMPLETE GUNSMITH'S CHAMFERING TOOL KIT. You get two 18deg Chamfer Cutters, two 18deg Brass Laps, the 11deg Brass Lap, the 5deg Brass Lap, the 11deg Chamfer Cutter, the .38 caliber 5deg Chamfer Cutter, all four 90deg Facing Cutters, all four chamfer tool Pilots and, of course, the Handle, Tool Extension Rod, Centering Guide, Breaker Bar, and 3/32"" Allen Wrench . . . all in the fitted, plastic, bench box. Mfg: Brownells

$260.99

* Pricing & Availability are subject to change at any time.

Brownells Barrel Nut Alignment Gauge

Fits into the end of the bolt carrier key to ensure that the barrel nut is properly aligned during installation of AR-15/M16 barrel. Improper alignment can damage the bolt carrier key and/or the gas tube. Mfg: Brownells SPECS: Steel. .178"" (4.5mm) diameter x 3"" (7.6cm) long.

$5.99

* Pricing & Availability are subject to change at any time.

Brownells Ar-15/M16 Ds4 Barreled Upper W/Moe Carbine M-Lok Handguards

Double Star Upper with 16"" DS-4 Barrel is ready to be your next build's foundation. DS-4 barrel features a 1-9 twist, M4 feedramps and a matte black, phosphate finish. Barrel is chambered in 5.56x45mm NATO, and does not have chrome lining. Flat top upper receiver is ready for the attachment of Picatinny accessories. Carbine gas tube and barrel assembly are ready for your choice of handguard and muzzle device. Barrel assembly accepts standard carbine handguards. Muzzle is threaded 1/2-28, for attachment of standard AR-15 devices. Standard, GI front sight base is installed and pinned. Upper features standard GI barrel nut. & Mfg: Brownells

$318.44

* Pricing & Availability are subject to change at any time.

Brownells Remington 700 Oversized Recoil Lug

Straight, non-tapered recoil lug fits most factory stocks and full-length aluminum bedding blocks without time consuming alterations. Engineered to be slightly thicker than the factory part for added stiffness that prevents flexing for improved accuracy. Surface ground perfectly flat for superior centerline tracking during recoil for consistent accuracy. Standard size matches overall factory lug dimensions, except thickness. Overbore has the same basic dimensions as the standard size, except bore I.D. is .015"" larger to fit barrels with oversized thread dimensions. Gunsmith installation required. Mfg: Brownells SPECS: Stainless steel (SS) , natural finish. Standard - 1.75"" (4.4cm) long, .230"" (5.85mm) thick, 1.3"" (3.3cm) O.D., 1.062"" (2.69cm) bore I.D. Overbore - 1.077"" (2.73cm) bore I.D.

$37.99

* Pricing & Availability are subject to change at any time.

Brownells Carrier Key Bit Kit

Two hex bits for installing the bolt carrier key socket head screws, plus an adapter that will connect the Carrier Key Bits to the 3/8"" Drive Torque Wrench. Small and large bits handle both early and late guns. Mfg: Brownells SPECS: Heat-treated steel. 185-2 Bit - 1/8"" (3.2mm) hex bit. 185-10 Bit - 9/64"" (3.6mm) hex bit. 1"" (2.5cm) long. Adapter - Heat-treated steel with retention clip adapts 3/8"" square drive to accept 1/4"" shank hex bits.

$9.99

* Pricing & Availability are subject to change at any time.

Brownells Mingo Tool Ar-15/M16 Gas Port Drilling Jig

Precision-machined aluminum jig is a fast, foolproof way to drill gas ports dead center on the top of the barrel and the correct distance from the gas block shoulder. Fit over the barrel after the barrel extension is installed, place the assembly on a flat surface, and the barrel is aligned and ready for drilling the gas port. Each jig has a setscrew that keeps the barrel firmly in place. Tool steel drill bushing keeps the drill bit precisely aligned. Jig sets available for .750"" and .936"" OD barrels. Extra front jigs and drill bushings available separately. Complete instructions included. Mfg: Brownells SPECS: 6061 aluminum, and tool steel.

$11.99

* Pricing & Availability are subject to change at any time.