Rivco - Products by Brand

108 Total Results

Rivco Engine Guard Highway Peg Mounts

Highway Peg Mounts for bikes equipped with engine guards (1-1/4"") as well as lowers These highway mounts are CNC machined from aircraft-quality billet aluminum, and triple chrome plated The structural design makes the mounts strong enough that you can stand on them and they WILL NOT SLIP With 56 possible mounting positions, the 6"" long arms have a full 360deg range of motion to accommodate any leg length The arms lock into the selected position with an internal locking pin Mounts can be used with any Rivco pegs or highway boards and most other brands Set includes all stainless steel hardware, and detailed mounting instructions Pegs sold separately

$139.99

* Pricing & Availability are subject to change at any time.

Rivco Quick Detach Solo Luggage Rack

Allows you to switch between the solo rack and passenger seat in seconds, without tools Laser cut from high quality steel and then triple chrome-plated Comes with all required stainless steel hardware and detailed mounting instructions

$149.99

* Pricing & Availability are subject to change at any time.

Rivco Classic Steel Highway Boards

Rivco angled the heels inward toward the center of the motorcycle at 10deg and built in an adjustment screw so you can set them to be angled up where they hinge to your liking They have a tall heel rest to prevent your foot from sliding down, can be folded up when not in use and stay in place with spring-loaded detents These highway boards come with 3/8"" mounting bolts and will work with all Rivco (and most other brands) mounts Polished to a flawless finish, triple chrome-plated, and inlaid with soft anti-vibration neoprene rubber 8"" x 5""

$171.99

* Pricing & Availability are subject to change at any time.

Rivco Aero Flip-Out Highway Pegs-Anodized Black For GL1800, F6B, Newer Valkyrie

Increase your TOURING COMFORT! - Anodized Aero Highway Pegs feature CNC machined billet aluminum streamlined stealth pegs that flip out with a flick of your boot Have several inches of forward-and-back adjustment

$299.99

* Pricing & Availability are subject to change at any time.

Rivco Rack Bag

This durable bag is made specifically for use with either of our 11"" x 16"" quick-detach hitch rack (ZZ84355) Made from heavy-duty water-resistant nylon and measures 11"" x 16"" x 12"" tall Using this bag will give you an additional 35% more storage Used with the rack it will keep the weight down low and not adversely affect handling Zippered outer storage compartments on three sides, carry handles, a detachable shoulder strap, a hidden stretch fit water and dust proof cover Optional locking rods 830-909 sold separately

TAGS Rivco Rack Bag
Read more
$79.99

* Pricing & Availability are subject to change at any time.

Rivco Classic Steel Passenger Floorboards

CNC-machined from billet aluminum with triple chrome plating They are 2"" further forward and 2"" lower than the stock peg location for added passenger leg room With soft anti-vibration neoprene rubber pads These floorboards also fold up when not in use 5"" x 8""

$229.99

* Pricing & Availability are subject to change at any time.

Rivco Premium Billet Driver Floorboards

Provide a highly customized look by simply bolting on in place of the stock pegs Add full support for your feet, as well as room to move around a little on longer rides Machined from billet aluminum, triple chrome-plated and inlaid with soft anti-vibration neoprene rubber Hinged on their mounts and will fold up in the event of a tip-over

$289.99

* Pricing & Availability are subject to change at any time.

Rivco Classic Steel Adjustable Passenger Floorboards

Adjusts to 12 positions through a rotating 9"" range of motion in seconds by pulling the spring-loaded locking pins Gives your passenger the best possible leg support and comfort With Rivco's exclusive Classic steel designs Anti-vibration rubber pads and ensure passenger comfort

$379.99

* Pricing & Availability are subject to change at any time.

Rivco Bagger Budz

No more searching through packed saddlebags for the fasteners and washers when you pull your bags for cleaning or maintenance Cable lanyards and nylon retaining washers keep the mounting system attached to the bags as a single unit Eliminate scratching your bags with polyurethane feet you attach to the bottom of your bags A single kit covers both saddlebags Works on both hard and soft saddlebags

$19.99

* Pricing & Availability are subject to change at any time.

Rivco Handlebar Risers

This set of billet risers are a bolt-on extension and cover plate to the original riser They are machined from billet aluminum, polished to a flawless finish, triple chrome plated and have a seamless fit They will bring the bars up 1/4"" and back 2-1/2"" They work with both the ""A"" lower and ""B"" higher handlebars from Honda The set includes all necessary hardware and a longer braided stainless steel brake line as well as complete instructions

$296.99

* Pricing & Availability are subject to change at any time.

Rivco Aluminum Handlebar Risers

CNC-machined billet aluminum Brings the handlebars back 3/4"" and up 1-1/2"" Significantly reduces the riders back strain and allows for a more relaxed cruiser style of riding Bolts on in minutes and retains all stock cables, hoses and wiring Fit 1"" handlebars Riser set only, reuse your existing top clamp or purchase top clamp separately

$162.99

* Pricing & Availability are subject to change at any time.

Rivco Handlebar Risers with Caps

While it may not seem like a lot, 1"" up and 2"" back towards the rider giving a much more upright seating position - rather than reaching over the gas tank This will significantly reduce back, neck, and shoulder fatigue These risers are machined from billet aluminum and are triple chrome plated They use the original hoses and cables with only minor re-routing required

$182.99

* Pricing & Availability are subject to change at any time.

Rivco License Plate Mount Double Flag Holder

High-quality flag holder and poles made from stainless steel that has been hand polished to a brilliant shine; will never rust or tarnish Easily mounts to all license plate holders and will remain sturdy even at highway speeds Accommodates 6"" x 9"" flags (not included) Includes clips to keep flags in place at pole tops

$49.99

* Pricing & Availability are subject to change at any time.

Rivco Chrome Adjustable Center Stand for Lowered Touring Models

Designed for Screamin' Eagle FLT and FLH models and any other FLT or FLH fitted with a Harley-Davidson lowering kit (12-1/4"" long center-to-center shock absorbers rather than the standard equipment 13"" center-to-center shocks) The feet on this stand screw in or out from the leg and lock in place with a setscrew Allows you to set the height that the rear wheel is lifted from the ground when on the stand at the recommended 3/4"" to 1"" and requires minimal effort to place the motorcycle up onto the centerstand This product can also be used as a ride-off stand Chrome

$329.99

* Pricing & Availability are subject to change at any time.

Rivco Drive Shaft Cover

Drive shaft cover by Rivco is triple chrome-plated and fits over the drive shaft Installs in minutes with supplied springs no tools needed Drastically improves the look of the driveline on your machine

$42.99

* Pricing & Availability are subject to change at any time.

Rivco 2"" Universal Driving Light Kits

Greatly increase the ability to see and be seen on the road Features chrome-plated 2"" steel housings, 55W halogen sealed beam lights and swivel mounts with hardware Compact; available with a 1-1/4"" clamp Mount to engine guards, handlebars, inside fairings or on light bar Includes switch, relay, all necessary wiring and detailed instructions

$149.99

* Pricing & Availability are subject to change at any time.

Rivco Mirror-Mount Driving Light Kit

2"" 55-Watt driving lights mount directly to the existing screw (no drilling) on the bottom of all GL1800 mirrors Chrome plated steel housing contain 55-watt halogen sealed beam bulbs While compact they deliver an amazing amount of light and in this high and wide location they provide greatly increased visibility of the road as well as to oncoming traffic Includes mounting hardware, plug in wire harness, relay, switch & easy to follow instructions

$139.99

* Pricing & Availability are subject to change at any time.

Rivco Trunk-Mounted Flag Holder Kit

Easily mounts to any trunk or hard saddlebag 14"" polished stainless steel pole with chrome-plated billet aluminum base and finial Mounts using double-sided adhesive and optional through-trunk stud Includes clips to keep flag at the top of the pole Accommodates flags up to 12"" H (flag not included)

$52.99

* Pricing & Availability are subject to change at any time.

Rivco Parade Flag Holder

This flag holder can be installed or detached from the RIVCO receiver bracket in seconds Included is the chromed bar, chrome plugs and one flag holder socket One or two more sockets can be added (sold separately) to accommodate up to three flags The sockets accommodate up to 1-1/4"" poles You will need the Rivco Receiver Bracket for use with existing trailer hitches sold separately 690-743

$139.99

* Pricing & Availability are subject to change at any time.

Rivco Adjustable Passenger Board Mounts

Machined to accept the stock Harley-Davidson accessory floorboards Can be adjusted in seconds through a 6""range of motion by simply pulling out the spring-loaded lock pins, then moving the board up or down until the pin clicks into the next position Triple chrome plated for a lasting shine

$329.99

* Pricing & Availability are subject to change at any time.

Rivco Passenger Board Relocation Arms

Provides a full 3-1/2"" of adjustment in a 360deg Radius Made of solid billet aluminum Fits part number ZZ55535

$79.99

* Pricing & Availability are subject to change at any time.

Rivco Chrome VTX Handlebar Risers

CNC- machined billet aluminum Brings the handlebars back 3/4"" and up 1-1/2"" Significantly reduces the riders back strain and allows for a more relaxed cruiser style of riding Bolts on in minutes and retains all stock cables, hoses and wiring Fit 1"" handlebars Riser set only, reuse your existing top clamp or purchase top clamp separately

$169.99

* Pricing & Availability are subject to change at any time.

Rivco Polished Aluminum Risers and Caps for Suzuki C50

CNC machined billet aluminum handlebar risers and caps bring the bars back 1-1/2"" and up 3/4"", significantly reducing rider back strain while allowing a much more relaxed ""cruiser"" style of riding This set has a high luster polished finish to match the stock aluminum steering head and includes caps and all necessary hardware Retains all of the stock cables, hoses and wiring without any rerouting for simple installation

$182.99

* Pricing & Availability are subject to change at any time.

Rivco Products Handlebar Risers

This set of risers replaces the originals and will bring the handlebars up to 1"" and back toward the rider 2"" While it may not sound like a lot, the 2"" gives you a much more upright seating position rather than reaching over the gas tank This will significantly reduce back, neck, and shoulder fatigue Machined from Aluminum and Chromed Uses the original hoses and cables with only minor rerouting required

$182.99

* Pricing & Availability are subject to change at any time.

Rivco Handlebar Risers for Vulcan Classic 1500/1600 VN2000

CNC-machined from billet aluminum, then polished to a mirror finish and triple chrome plated Bring the bars back a full 3/4"" and up 2"" Significantly reduces rider back, neck, and shoulder strain and allows for a more relaxed riding position Bolt on in minutes and retain all stock hoses and cables

$182.99

* Pricing & Availability are subject to change at any time.

Rivco 2"" Peg Extensions

Chrome plated extensions will work for all Rivco pegs Adds 2"" of width to each side Mounts between the peg and clevis folding mechanism Will fold up with the peg

$39.99

* Pricing & Availability are subject to change at any time.

Rivco 3"" Peg Extensions

Chrome plated extensions will work for all Rivco pegs Adds 3"" of width to each side Mounts between the peg and clevis folding mechanism Will fold up with the peg

$42.99

* Pricing & Availability are subject to change at any time.

Rivco 1-1/4"" Chrome Three Piece Clamps

Pair of 3-piece heavy duty steel clamps with chrome finish Good economical choice for highway peg mounting Will work on any 1.25"" engine guard and will accept most pegs Sold in pairs only Chrome finish

$24.99

* Pricing & Availability are subject to change at any time.

Rivco 1-1/4"" Black Engine Guard Clamps

Pair of 3-piece heavy duty steel clamps with chrome finish Good economical choice for highway peg mounting Will work on any 1.25"" engine guard and will accept most pegs Sold in pairs only Black powdercoated finish

$31.99

* Pricing & Availability are subject to change at any time.